501/ED BAR AND GAUGE
A) Iron, chrome plated.
B) Brass Chrome Plated
Explore the Heat & Energy catalogue with product descriptions and individual product images.
A) Iron, chrome plated.
B) Brass Chrome Plated
Heavy, one piece cast iron stand carries a rod which has hole for taking cast iron pins at one end. The other end is threaded and a hand wheel exerts force on the cast iron pin which breaks under tension.
With wooden handle :
A) Iron & Aluminium
B) Iron & Brass
C) Iron & Copper
D) Brass & Copper
Solid aluminium block, cylindrical, 7.5 cm height and 7.5 cm dia., weight about 1 kg. with central hole to take immersion heater and a smaller hole for thermometer. Complete with suitable immersion heater w/o thermometer.
Capacity (litres): a) 1/2 b) 1 c) 2
Made of copper sheet.
In one piece, copper.
Size : 100 (height) x 75 (dia) mm
Complete with outer rectangular wooden polished box with thermometer holder and copper stirrer with joint less copper vessel
A) 75 x 50 mm
B) 100 x 75 mm
Consists of a copper vessel 75 x 50 mm with outer vessel of Teak wood fitted with Bakelite Top with hole for Thermometer and stirrer. The terminals connected to a coil of wire for current.
Spherometer or micrometer screw from reading to 0.01 mm. It is rigidly and accurately constructed apparatus, with binding posts for connecting a bell or a galvanometer to indicate contact. The tube is of brass, chrome plated, and has stream inlet and outlet and tubulure for thermometer. The stand is strengthened with two rods. 3 experimental rods of brass, copper and steel are provided.
12V, 50 W to fit into aluminium block 12x60 mm (dia x length). Overall length 150 mm. Supplied with approx. 1.5 meter long lead.
Made of stout galvanized iron sheet, with rods
Brass ball with handle and chain, Dia of ball (mm): a) 18 b) 25.
On stand Brass ball 25 mm dia is suspended from a rod, on a tripod stand.
Size : 30 cm length x 0.3 cm dia Consists of:
A) Iron
B) Copper
C) Aluminium
Set of 6 cylinders of different metals brass, copper, iron, aluminium, lead and zinc, of same mass 100 gms, same dia but different lengths, with holes for suspension. A wooden box is provided for storing the cylinders.
Consists of copper rod 30 x 2.5 cm dia with its one end surrounded with steam jacket for heating from boiler and the other end is kept cool by stream of water flowing through a spiral tube fitted on teak wood case without thermometer and boiler.
Comprising of Bars of copper, Iron, Aluminium and Brass with normal thermal conductivities respectively. Each 80 x 1.5 mm provided with hollow for wax, and mounted on wooden ring. Outside diameter 130 mm. Inside Diameter 80 mm.
Send EME the product code, quantity and required specification for your Heat & Energy requirement.