EME Laboratory Range

Laboratory Accessories

Laboratory accessories catalogue with individual product descriptions and clear product images from the seven supplied catalogue sheets.

601/PP BRUSHES FOR BEAKER

Nylon bristles, galvanised wire with sleeves.
Available sizes shown in the supplied catalogue.

602/PP BRUSHES FOR BOTTLES

Nylon bristles, galvanised wire with sleeves.
Available sizes shown in the supplied catalogue.

603/PP BRUSHES FOR BURETTE

Nylon bristles, galvanised wire with sleeves.
Available sizes shown in the supplied catalogue.

604/PP BRUSHES FOR FLASK

Nylon bristles, galvanised wire with sleeves.
Available sizes shown in the supplied catalogue.

605/PP BRUSHES FOR PIPETTE

Nylon bristles, galvanised wire with sleeves.

606/PP BRUSHES FOR TEST TUBES

Nylon bristles, galvanised wire with sleeves.
Available sizes shown in the supplied catalogue.

608/ED BLOCK : IRON

For laboratory use; supplied as shown in the catalogue.

610/ED BUNSEN BURNER

Cast burner with brass/metal construction; available with the configurations shown in the supplied catalogue.

612/ED CHARCOAL BLOCK

A) Approx. 230 × 230 × 25 mm
B) Approx. 75 × 75 × 25 mm.

613/ED ROD HEAD

Rod head supplied with clamp arrangements and accessories as shown in the catalogue.

614/VT CLAMP : BURETTE - RH sided

Clamp with rubber-lined gripping arrangement; configurations shown in the supplied catalogue.

615/VT POLE CLAMP - FINGER

Clamp with finger grip arrangement; nickel/chrome plated construction as supplied.

616/VT CLAMP : THREE FINGER

Three-finger clamp, nickel/chrome plated construction.

617/VT CLAMP : TWO FINGER

Two-finger clamp; available in the configurations shown.

618/VT CLAMP : C TYPE

Cast/metal C-type clamp; supplied with the configuration shown.

620/EL CORK BORER SHARPENER

Steel cutting blade is fitted in a slotted steel cone, wooden handle.

621/EL CORK BORERS

With separate handle to each borer, cutting edge at bottom, brass, chrome-plated, set complete with cleaning rod.
Set of a) Three b) Six c) Twelve.

622/SB CORKS

Cork sizes listed in the catalogue from No. 000 through No. 20, with top diameter, bottom diameter and height dimensions.

623/EL GAS TAPS

Oxidised or chrome plated. Gas taps of gun metal, with lever handles.
A) Gas Taps – One way
B) Gas Taps – Two way
C) Gas Taps – Three way
D) Gas Taps – Four way

625/ED DEFLAGRATING SPOON

Improved with friction sliding disc held by a cork to keep it at any height. Length 350 mm. Cup dia. 18 mm; disc dia. 90 mm.

627/NA DISSECTING SET

A) Set of seven instruments: dissecting scissors, forceps, knife handles and dissecting needle.
B) Set of 14 instruments: above seven plus arrow/seeker needles, flapper, stainless-steel razor, magnifier, chain hooks and blow pipe.

629/RS FILTER PAPER - CIRCLES

Circles, packet of 100 circles. Dia. (cm): 7, 9, 11, 12.5, 15, 18.5, 24, 27, 32, 38.5.
A) Range 1 paper
B) A-1 qualitative paper.

630/RS FILTER PAPER - SQUARES

Available in 100 sheets, 250 sheets, 500 sheets. Size 46 × 57 cms.

631/IN INDICATOR PAPERS

Size 65 mm × 10 mm. Contains 5 books and each book contains 20 leaves.
A) Packed in cardboard packet
B) Packed in plastic container
Blue/red litmus, lead acetate, methyl orange, potassium iodide, phenol red, starch, starch iodide and turmeric papers.

633/ED LENSE HOLDER : OPTICAL

Wooden optical lens holder.

634/FR MAGNESIUM RIBBON

Thickness 0.2 mm; supplied in 25 g quantity.

635/AJ MICROSCOPE COVER SLIPS

Colourless, free from bubbles, pack of 10 gms. Thickness 0.08–0.12 mm or 0.13–0.16 mm.
Square, rectangular and circular sizes as listed in the catalogue.

636/AJ MICROSCOPE SLIDES

Length 74 mm; width 26 mm; thickness 0.95, 1.15, 1.35 mm. Pack of 50 slides.
A) Ground edges
B) Ground edges with one side frosted
C) Ground edges with both sides frosted.

638/AC NET AQUATIC COLLECTION : (D-SHAPED)

Strongly built for sweeping up aquatic fauna. Net ring and handle can be separated for easy carriage. Strong D-shaped ring frame, dia. 12" with stout handle.

639/AC NET INSECT COLLECTION

Strong wire ring dia. 12". Anodized aluminium handle fitted with hand grip. Heavy die-pressed clamp and fastening device for clamping the handle with net ring.

640/AC NET PLANKTON COLLECTION

35" long collection bag made of strong netting cloth and mounted on wire ring dia. 12". Three strong leads attached to swivel from lower end of bag; 2" opening with strong cloth pocket for tying the collection vial.

642/ED PINCH CLIP

Thick wire, chrome plated.

644/EL PIPE CLAY TRIANGLE

Pipe clay stems on iron wire.
Size: 50, 60, 75 mm.

646/VI RETORT STAND

Rectangular cast iron powder-coated base with rods to be screwed into base. Rod is chrome plated; base sheet 4 mm thick.
Sizes and rod dimensions as listed in the catalogue.

647/VI RETORT STAND RINGS

Rod dia.: 2", 2.5", 3", 4", 5" & 6".

648/VI RETORT STAND RODS

Chrome-plated mild steel.
Length of rod (mm): 50, 60, 75, 100.
Diameter of rods (mm): 10, 12.5, 12.5, 12.5.

650/ED RODS - DIFFERENT TYPES

A) Glass: size 30 × 1.25 cm
B) Ebonite: size 30 × 1.25 cm
C) Brass: size 25 × 1.20 cm
D) Brass & Ebonite: size 25 × 1.20 cm
E) Brass & Glass: size 25 × 1.20 cm
F) Perspex.

652/3A RUBBER DROPPER WITH TEAT

Sizes: 3", 4", 6", 8", 10".

653/3A RUBBER PIPETTE BULB

Sizes: Small, Medium, Large, Extra Large.

654/SW RUBBER STOPPERS

Available sizes with bottom diameter, top diameter and height as listed in the supplied catalogue.

656/ED SPATULA : WITH HANDLE

Stainless steel, spatula blade with wooden handle. Supplied in pack of 10.
Blade length (mm): 75, 100, 125, 150.

657/ED SPATULA : ANGLE END

Angle end, rounded stainless steel, length 100 mm.

658/ED SPATULA : CHATTWAY'S

Combination of round-disc / square-blade spatula made of stainless steel. Highly finished. Length 175 mm. Supplied in pack of 10.

659/ED SPATULA : RAISED CENTRE

Raised centre, one end flat and bent up and another end formed into a scoop. Stainless steel, length 150 mm.

660/ED SPATULA : TROWEL

Double ended with trowel-shaped scoop, size 175 × 15 mm.

661/ED SPATULA : WITH SPOON

Spoon end ideal for crushing lumps, breaking cakes etc.; square end useful for scraping/chopping etc. Polished stainless steel. Pack of 10. Length: 200, 150 mm.

663/ED TEST-TUBE HOLDER : WIRE TYPE

Of plated spring steel wire, with a wire collar. Will accept test-tubes up to 38 mm diameter.

664/ED TEST-TUBE HOLDER : WOODEN

With wooden handle.

665/ED TEST-TUBE HOLDER : WOODEN WITH SPRING

Wooden with steel spring for closing jaws. Length 185 mm. To take tubes up to 19 mm diameter.

667/ED TONGS : CRUCIBLE

Made of stout thick wire and stamped, jaws corrugated, all chrome plated.
A) Mild steel – available in 6" and 8"
B) Brass – available in 6" and 8"
C) Stainless steel – available in 6" and 8".

668/ED TONGS : BEAKER

Made of thick wire mild steel, chrome plated. 12" long.

669/ED TONGS : FLASK

Made of thick wire mild steel, chrome plated. 12" long.

671/VN TRAYS MELAMINE : COLOUR - WHITE

Size: 326 mm × 227 mm × 15 mm.
Any other colour can be offered.

672/BD TRIPOD STAND

Metal tripod stand with three legs; construction and dimensions as supplied in the catalogue.

673/SM TUBING : RUBBER

Rubber tubing available in the sizes listed in the catalogue.

677/ON UNIVERSAL pH PAPER

Universal pH paper with colour chart and assorted pH ranges, supplied in the catalogue configurations.

678/ON UNIVERSAL pH PAPER - ROLL FORM

Universal pH paper in roll form.

680/BL WATER TAP

Laboratory water taps in the configurations shown, including standard and chrome-plated variants.

682/BL WIRE GAUZE

Square wire gauze with central asbestos/heat-resistant area, as shown in the catalogue.

684/BD WOODEN BURETTE STAND

Wooden burette stand, available in the configurations shown in the catalogue.

685/BD WOODEN FUNNEL STAND

Wooden funnel stand, available in the configurations shown in the catalogue.

686/BD WOODEN PIPETTE STAND

Wooden pipette stand for keeping pipettes in the vertical position.

687/BD WOODEN STAINING RACK

Wooden staining rack, available for the bottle configurations shown in the catalogue.

688/BD WOODEN TEST TUBE STAND

Made of hardwood with plywood; available for 8 tubes and 12 tubes with the dimensions shown in the catalogue.

689/LE ALUMINIUM TEST-TUBE STAND

Aluminium test-tube stand; construction and tube capacity as shown in the catalogue.

692/MG APRON : PVC

PVC coated aprons with cloth backing. Assorted sizes available.

693/RO LABCOATS

100% cotton, colour: white / blue.
Size: A) Small, B) Medium, C) Large, D) Extra large.

Need a quotation?

Product Inquiry

Send EME the product code, quantity and required specification for your Laboratory Accessories requirement.

Send Inquiry